docs: fill Kapa coverage gaps for CLI uninstall, URI scheme, and panels

src/content/docs/agents/cli-agents/claude-code.mdx

@@ -70,6 +70,8 @@ Claude Code supports Warp's full set of agent integration features:
 * **Tab Configs** - Save and restore Claude Code session configurations.
 * **[Remote Control](/agents/cli-agents/remote-control/)** - Publish your Claude Code session so you can monitor and steer it from another device.
 
+Claude Code sessions do **not** appear in the Conversation Panel or Agent Management Panel. Those surfaces list Warp Agent conversations and cloud runs. For where third-party CLI agents show up, see [Third-party CLI agents overview](/agents/cli-agents/overview/#where-third-party-cli-agents-appear).
+
 ## Related pages
 
 * [How to set up Claude Code](/guides/external-tools/how-to-set-up-claude-code/) — step-by-step setup guide

src/content/docs/agents/cli-agents/overview.mdx

@@ -45,6 +45,17 @@ When you launch a supported agent inside Warp, the **agent toolbelt** appears au
 <figcaption>The agent toolbelt for CLI agents.</figcaption>
 </figure>
 
+## Where third-party CLI agents appear
+
+Third-party CLI agents run inside a terminal pane. Warp detects the session and shows status on that pane and in [vertical tabs](/terminal/windows/vertical-tabs/), not as Warp Agent conversation threads.
+
+* **Conversation Panel** - Lists Warp Agent conversations and cloud agent runs. Claude Code, Codex, OpenCode, and other third-party CLI agents do **not** appear there.
+* **Agent Management Panel** - Manages Warp-managed agents and cloud runs. Third-party CLI agents do **not** appear there.
+* **Vertical tabs and the agent toolbelt** - Show live third-party CLI agent status while the process is running in a pane.
+* **Remote Control** - Publishes a running third-party session so you can monitor or steer it from another device. See [Remote Control](/agents/cli-agents/remote-control/).
+
+If you expected a Claude Code session in the Conversation Panel, that is expected behavior today. Keep the session in its tab, use vertical-tab status, or publish it with Remote Control.
+
 ## Feature support
 
 Not every feature is available for every agent. The table below shows current support.

src/content/docs/agents/cli/index.mdx

@@ -53,3 +53,4 @@ If you already use the Warp app, most of your setup carries over. Rules and skil
 * [Input and shell commands](/agents/cli/input-and-shell-commands/) - Compose prompts and run shell commands from the same input.
 * [Configuration](/agents/cli/configuration/) - Customize the CLI with the settings file.
 * [Reference](/agents/cli/reference/) - Flags, slash commands, and keyboard shortcuts.
+* [Uninstall the Warp Agent CLI](/support-and-community/troubleshooting-and-support/logging-out-and-uninstalling/#uninstalling-the-warp-agent-cli) - Remove the CLI without removing the Warp app.

src/content/docs/agents/cli/quickstart.mdx

@@ -115,8 +115,13 @@ Run the printed command later to pick up where you left off.
 
 To browse and reopen past conversations from inside the CLI, see [Agent conversations](/agents/cli/agent-conversations/#conversation-history).
 
+## Uninstall the Warp Agent CLI
+
+The CLI is separate from the Warp desktop app. To remove an install-script or Homebrew install, and optional local agent data, see [Uninstalling the Warp Agent CLI](/support-and-community/troubleshooting-and-support/logging-out-and-uninstalling/#uninstalling-the-warp-agent-cli).
+
 ## Next steps
 
 * [Agent conversations](/agents/cli/agent-conversations/) - Work with the transcript, code diffs, plans, and tasks.
 * [Customizing the CLI](/agents/cli/configuration/) - Rules, skills, MCP servers, themes, and settings.
 * [Reference](/agents/cli/reference/) - All flags, slash commands, and keyboard shortcuts.
+* [Logging out & uninstalling](/support-and-community/troubleshooting-and-support/logging-out-and-uninstalling/#uninstalling-the-warp-agent-cli) - Remove the CLI binary and related local files.

src/content/docs/knowledge-and-collaboration/warp-drive/notebooks.mdx

@@ -46,6 +46,14 @@ The notebook will not be saved until either title or body text is added.
 <figcaption>Editing a Notebook.</figcaption>
 </figure>
 
+### Open an existing notebook
+
+* Open the [Warp Drive](/knowledge-and-collaboration/warp-drive/) panel and select the notebook.
+* Search for the notebook title in the [Command Palette](/terminal/command-palette/).
+* Open a shared or local deep link. Warp Drive share links use a web URL such as `https://app.warp.dev/drive/notebook/NAME-OBJECT_ID`. You can also open the notebook directly in the app with `warp://drive/notebook?id=OBJECT_ID`. See [Warp URI scheme](/terminal/more-features/uri-scheme/#warp-drive-objects).
+
+Notebooks are not a pane type you can launch from a [Tab Config](/terminal/windows/tab-configs/) today. Use a Drive link, the Command Palette, or the Warp Drive panel after the window opens.
+
 ### Working with Notebooks
 
 #### Adding new elements
@@ -173,4 +181,12 @@ Only one editor is allowed at a given time. Opening the notebook while there is
 
 ### Import and export notebooks in Warp Drive
 
-See our [Warp Drive Import and Export](/knowledge-and-collaboration/warp-drive/#import-and-export) instructions.
+Notebooks import from and export to Markdown (`.md`). Use the Warp Drive import and export flow described in [Import and export](/knowledge-and-collaboration/warp-drive/#import-and-export).
+
+When you import a Markdown file:
+
+* Headings, paragraphs, lists, tables, and fenced code blocks are preserved as notebook elements when the editor supports them.
+* Fenced blocks tagged as shell languages (for example `bash`, `sh`, or `shell`) become **command blocks** you can insert and run in the terminal.
+* Other fenced languages become **code blocks** with syntax highlighting when Warp recognizes the language.
+
+Export writes the notebook back to Markdown so you can edit it outside Warp or check it into a repository.

src/content/docs/support-and-community/troubleshooting-and-support/known-issues.mdx

@@ -57,7 +57,9 @@ There is a known issue that can occur that causes online features to break ([Age
 
 ### English-only UI
 
-Nov 2021: We have added character support for Chinese, Korean, and Japanese, but our UI currently only supports English.
+Warp's interface is English-only. There is no language or locale setting in **Settings**, and no supported workaround to switch the UI to another language.
+
+The terminal can display Chinese, Korean, and Japanese characters in command output and editor text. For localization requests and status, see open [GitHub issues about language support](https://github.com/warpdotdev/Warp/issues?q=is%3Aissue+is%3Aopen+language+OR+i18n+OR+locale).
 
 ### Abnormal rendering of Chinese characters
 

src/content/docs/support-and-community/troubleshooting-and-support/logging-out-and-uninstalling.mdx

@@ -1,7 +1,7 @@
 ---
 title: "Logging out & uninstalling"
 description: >-
-  How to log out from Warp, and how to uninstall Warp.
+  Log out of Warp, uninstall the Warp app, or remove the Warp Agent CLI and its local files.
 sidebar:
   label: "Logging Out & Uninstalling"
 ---
@@ -165,3 +165,65 @@ If you're using Warp Preview, replace "Warp-Stable" with "Warp-Preview" in the c
     ```
   </TabItem>
 </Tabs>
+
+## Uninstalling the Warp Agent CLI
+
+The [Warp Agent CLI](/agents/cli/) is a separate install from the Warp desktop app. Removing the app does not remove the CLI, and removing the CLI does not uninstall the app.
+
+### Install-script installs (macOS, Linux, and Windows)
+
+The install script places a versioned install under a data directory and puts a `warp` entry on your `PATH`.
+
+Default locations:
+
+* **macOS and Linux** - Install root `~/.warp/tui/` (versioned binaries under `versions/`, active build at `current`), symlink at `~/.local/bin/warp`
+* **Windows** - Install root `%LOCALAPPDATA%\Warp\tui\`, CLI entry under `%LOCALAPPDATA%\Warp\bin\`
+
+If you overrode the defaults with `WARP_TUI_INSTALL_DIR` or `WARP_TUI_BIN_DIR` when you installed, remove those paths instead.
+
+<Tabs>
+  <TabItem label="macOS and Linux">
+    ```bash
+    # Remove the PATH entry for the CLI
+    rm -f "${WARP_TUI_BIN_DIR:-$HOME/.local/bin}/warp"
+
+    # Remove the versioned install (binaries, auto-updater state)
+    rm -rf "${WARP_TUI_INSTALL_DIR:-$HOME/.warp/tui}"
+    ```
+  </TabItem>
+  <TabItem label="Windows">
+    Run these commands in PowerShell:
+
+    ```powershell
+    $installDir = if ($env:WARP_TUI_INSTALL_DIR) { $env:WARP_TUI_INSTALL_DIR } else { Join-Path $env:LOCALAPPDATA 'Warp\tui' }
+    $binDir = if ($env:WARP_TUI_BIN_DIR) { $env:WARP_TUI_BIN_DIR } else { Join-Path $env:LOCALAPPDATA 'Warp\bin' }
+
+    # Remove CLI entries on PATH (name depends on installer version)
+    Get-ChildItem -Path $binDir -Filter 'warp*' -ErrorAction SilentlyContinue | Remove-Item -Force
+
+    # Remove the versioned install
+    Remove-Item -Path $installDir -Recurse -Force -ErrorAction SilentlyContinue
+    ```
+  </TabItem>
+</Tabs>
+
+### Homebrew installs
+
+```bash
+brew uninstall --cask warp-agent-cli
+```
+
+### Optional local data
+
+These directories are shared with other Warp agent surfaces. Remove them only if you no longer need the data:
+
+* **Agent config** - `~/.agents/` (on Windows, `%USERPROFILE%\.agents\`)
+* **MCP config and bundled skills** - `~/.warp/.mcp.json` and `~/.warp/skills/` (on Windows, under `%USERPROFILE%\.warp\`)
+
+:::caution
+Deleting `~/.warp/` also removes MCP config and skills used by the Warp desktop app. Prefer deleting only the CLI install paths above unless you intend a full cleanup.
+:::
+
+To confirm the CLI is gone, open a new terminal and run `warp --version`. The shell should report that the command was not found.
+
+For install steps, see the [Warp Agent CLI quickstart](/agents/cli/quickstart/).

src/content/docs/terminal/more-features/uri-scheme.mdx

@@ -1,8 +1,7 @@
 ---
 title: Warp URI Scheme
 description: >-
-  Warp's URI scheme enables you to programmatically open new windows, tabs,
-  launch configurations, or tab configs with ease.
+  Open windows, tabs, Tab Configs, Settings, and Warp Drive objects with warp:// deep links.
 sidebar:
   label: "Warp URI scheme"
 ---
@@ -16,12 +15,47 @@ There are several ways to use the URI scheme:
 * Open new tab `warp://action/new_tab?path=<path_to_folder>`
 * Open Launch Configuration `warp://launch/<launch_configuration_path>`
 * Open Tab Config `warp://tab_config/<name>` — opens the saved [Tab Config](/terminal/windows/tab-configs/) as a new tab in the active window. Append `?new_window=true` to open it in a new window instead. `<name>` is matched case-insensitively against the file stem of the `.toml`, so both `warp://tab_config/my_tab` and `warp://tab_config/my_tab.toml` resolve to `my_tab.toml`.
+* Open a Warp Drive object `warp://drive/<object_type>?id=<object_id>` — opens a notebook, workflow, folder, or environment variables object. See [Warp Drive objects](#warp-drive-objects).
 * Open Settings `warp://settings` — opens the Settings window. See [Settings deep links](#settings-deep-links) for search, widget, and sub-page options.
 
 :::note
 [Warp Preview](/support-and-community/community/warp-preview-and-alpha-program/) URI scheme begins with `warppreview://`
 :::
 
+## Warp Drive objects
+
+Open a saved Drive object by type and ID:
+
+```text
+warp://drive/notebook?id=OBJECT_ID
+warp://drive/workflow?id=OBJECT_ID
+warp://drive/folder?id=OBJECT_ID
+warp://drive/env-vars?id=OBJECT_ID
+```
+
+* **`OBJECT_ID`** - The object's ID from a shared Drive link. When you copy a link from Warp Drive, Warp produces a web URL such as `https://app.warp.dev/drive/notebook/NAME-OBJECT_ID`. The final hyphen-separated segment is the ID to pass as `id`.
+* **Optional query params** - `focused_folder_id` focuses a folder in the Drive panel, and `invitee_email` can prefill an invite when the link is used for sharing flows.
+
+Example:
+
+```bash
+open "warp://drive/notebook?id=LkDlnAe34vfYD2JXsAkssc"
+```
+
+On Linux, pass the same URI to `xdg-open`. On Windows, use `Start-Process` with the URI string.
+
+For creating and sharing notebooks, see [Warp Drive Notebooks](/knowledge-and-collaboration/warp-drive/notebooks/).
+
+## What the URI scheme does not do
+
+The `warp://` scheme opens Warp surfaces. It does **not**:
+
+* Run a shell command, script, or agent prompt in the new tab or window
+* Wait for interactive input and return a result to the caller
+* Target or control an already-open tab or pane
+
+To open a layout that runs startup commands, save a [Tab Config](/terminal/windows/tab-configs/) and open it with `warp://tab_config/<name>`. For a longer-running agent session you can monitor later, use [Remote Control](/agents/cli-agents/remote-control/) after the agent is already running.
+
 ## Settings deep links
 
 Open the Settings window directly, optionally jumping to a specific page, widget, or search:

src/content/docs/terminal/settings/file-locations.mdx

@@ -53,6 +53,7 @@ The tables below cover the **Stable** channel. For **Preview**, see [Preview cha
     * **MCP server config** - `~/.warp/.mcp.json`
     * **Bundled skills** - `~/.warp/skills/`
     * **Agent config** - `~/.agents/`
+    * **Warp Agent CLI install** (install-script default) - `~/.warp/tui/` with a `warp` symlink in `~/.local/bin/`
   </TabItem>
   <TabItem label="Windows">
     On Windows, Warp follows the platform conventions used by the [`directories`](https://docs.rs/directories) crate, which splits user data across `%APPDATA%` (Roaming) and `%LOCALAPPDATA%` (Local). Themes and tab configs are portable and live in Roaming, while settings, logs, and the local database are machine-specific and live in Local. Two separate `data\` directories exist as a result — one under each root — so check the full path when locating files.
@@ -82,6 +83,7 @@ The tables below cover the **Stable** channel. For **Preview**, see [Preview cha
     * **MCP server config** - `%USERPROFILE%\.warp\.mcp.json`
     * **Bundled skills** - `%USERPROFILE%\.warp\skills\`
     * **Agent config** - `%USERPROFILE%\.agents\`
+    * **Warp Agent CLI install** (install-script default) - `%LOCALAPPDATA%\Warp\tui\` with CLI entries under `%LOCALAPPDATA%\Warp\bin\`
   </TabItem>
   <TabItem label="Linux">
     On Linux, Warp follows the [XDG Base Directory Specification](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html). Each path below uses the standard XDG environment variable with its default fallback.
@@ -110,9 +112,12 @@ The tables below cover the **Stable** channel. For **Preview**, see [Preview cha
     * **MCP server config** - `~/.warp/.mcp.json`
     * **Bundled skills** - `~/.warp/skills/`
     * **Agent config** - `~/.agents/`
+    * **Warp Agent CLI install** (install-script default) - `~/.warp/tui/` with a `warp` symlink in `~/.local/bin/`
   </TabItem>
 </Tabs>
 
+For removing the Warp Agent CLI without uninstalling the desktop app, see [Uninstalling the Warp Agent CLI](/support-and-community/troubleshooting-and-support/logging-out-and-uninstalling/#uninstalling-the-warp-agent-cli).
+
 ## Preview channel paths
 
 Preview uses a separate set of directories so it never overwrites your Stable config: