analog-sensor

Open redesign of an acquisition system for laboratory tests on internal erosion in soils

Arduino library to make a servo motor with an analog sensor, a bidirectional DC motor, and an H-bridge.

A small Raspberry Pi IoT-project using Adafruit IO Dashboard, MCP3008 ADC and DHT11-sensor.

Arduino automatic light control using LDR photoresistor - turns LED on/off based on ambient light threshold

Arduino library for 7Semi SHT4x-Analog humidity and temperature sensors. Converts analog RH/T signals into accurate %RH and °C/°F readings.

Reads an analog sensor via ttyusb

🔆 سنسور يُعاير نفسه تلقائياً خلال 8 ثواني ويحسب threshold للتحكم بـ LED مع إشارات buzzer Analog sensor self-calibrates over 8 seconds, computes a threshold, then controls an LED based on live readings

This Arduino library provides an interface for reading 3-axis analog acceleration data from the 7Semi ADXL335 Accelerometer Module. It allows easy integration and measurement of X, Y, and Z axis acceleration using Arduino analog inputs.

A simple Arduino-based digital voltmeter using a 16x2 I2C LCD display.

Line following robot using analog line sensor and Arduino Nano as microcontroller

MQ4 Methane (CNG) Gas Sensor Board Module

📡 قراءة سنسور تناظري على A0 وتحويل نطاق قيمته من (0–1023) إلى (0–150) باستخدام map() Reads an analog sensor on A0 and remaps its value from (0–1023) to (0–150) using map(), printed every second

Simple analog sensor that uploads it's values to a server, based on the WeMos D1 R1 (ESP8266)

Implementation of an Arduino-based analog sensing system using an LDR and dual actuators (LED + buzzer). The project demonstrates threshold-based decision-making, hardware interfacing, and real-time monitoring with complete documentation.

eNodeMCU (ESP8266) LDR-based IoT data logging system featuring cloud integration (ThingSpeak) and an ESP-hosted local dashboard with live chart update

Real-time temperature monitoring using LM35 analog sensor and Arduino Uno — reads voltage via ADC, converts to °C and °F, outputs to Serial Monitor every second. First year embedded systems project.

Analog water level detection sensor breakout board for embedded and IoT liquid sensing applications.

🎵 سنسور تناظري يتحكم بتردد نغمة Buzzer بين 200 و400Hz بعد معايرة تلقائية 10 ثواني Analog sensor controls buzzer pitch between 200–400Hz after a 10-second auto-calibration using constrain and map

arduino simple code for rain sensors

Arduino library for INA240A1, INA240A2 and INA240A3 bidirectional current sense amplifiers with offset calibration and current measurement support.